What are the reasons for belt deviation in belt scales

Belt scales are mainly used in production-oriented enterprises, especially those that transport goods. But some customers have also reported that the belt of the belt scale often deviates. What are the reasons for this? Below, the editor will explain it to everyone.

The main reasons for belt deviation in belt scales are as follows:

1. The centerline of the drum is not at a right angle to the centerline of the tape machine, and it needs to be reinstalled to ensure that the axial centers of the head and tail drums are consistent; The unevenness of the drum causes the tape to deviate. If the installation exceeds the tolerance, it should be leveled. If the outer diameter is inconsistent during manufacturing, the outer circle of the drum needs to be reprocessed.

What are the reasons for belt deviation in belt scales

2. The adhesive material on the surface of the drum makes it a conical surface, which can cause the tape to deviate to one side. This is caused by scattering, and attention should be paid to preventing this phenomenon and cleaning it regularly.

3. Caused by an installation centerline that is not straight.

4. If the tape deviates once a load is applied, it is often due to the material's discharge point not being in the middle of the tape, and corresponding adjustments should be made.

5. When the tape is unloaded, the empty vehicle runs off track, but it will be corrected after adding materials. This phenomenon is usually caused by excessive initial tension and should be adjusted appropriately.

The above content is about the reasons for the deviation of the belt scale, hoping to help everyone. If the above situation is encountered during use, adjustments can be made according to the above situation.